Change Builders Range Roller Blind From Front Roll to Back Roll
By Betta Blinds and Awnings - 5th December 2022
Note
This applies to our Builders Range Roller Blinds. If you have a Standard Range Roller Blind you can check out this guide instead.
This applies to our Builders Range Roller Blinds. If you have a Standard Range Roller Blind you can check out this guide instead.
What is a Back Roll Roller Blind?
A Back Roll Roller Blind places the fabric deeper into the window. This reduces the amount of space between the Blind Fabric and the window. In a back roll the fabric rolls off the back of the tube and into the window.
Remove the Blind from the Brackets
1. Retract the idle end of the Roller Blind and remove the blind from the brackets
2. Remove the chain drive and idle end pin from the tube
2. Remove the chain drive and idle end pin from the tube
Flip the Blind
3. Hold the blind in one hand and rotate it so that it is now in the back roll position.
Remove the Clear Caps from the Bottom Rail
4. Use a flat head screwdriver to carefully remove one of the caps from the bottom rail
Flip the Bottom Rail
5. Flip the bottom rail so that the correct side is facing the front
6. Replace the plastic cap into the bottom rail
6. Replace the plastic cap into the bottom rail
Add the Chain Drive and Idle End
7. Add the chain drive and idle ends back into the tube. Ensure you place them into the correct side so that the Blind will fit correctly in your brackets.
Test the Blind
8. Test the Blind to ensure that it is performing correctly.
And You're Done!
Congratulations you have successfully changed a Builders Range Roller Blind from Front Roll to Back Roll.
